======================================================================= Latest version is "15.3" and location is: "https://roumenpetrov.info/secsh/README.x509v3" Main page is "https://roumenpetrov.info/secsh/" Readme file for this version follow after separator: ======================================================================= Roumen Petrov Sofia, Bulgaria Wed Apr 12 2006 How to use X.509 certificates with OpenSSH? Identity or hostkey file for protocol version 2 can contain private key plus X.509 certificate in PEM format. Note that protocol version 2 keys are in PEM format. To use X.509 certificate as identity or hostkey user should convert certificate in PEM format and append to file. After this with "ssh-keygen -y ..." user must update "pub" file. File (identity or hostkey) with X.509 certificate (RSA key): -----BEGIN RSA PRIVATE KEY----- ..... -----END RSA PRIVATE KEY----- -----BEGIN CERTIFICATE----- ..... -----END CERTIFICATE----- Note that to use X.509 certificates in OpenSSH files must contain private key followed by certificate that match private key! 1.) server configuration: 1.1.) .../sshd_config 1.1.1.) AllowedCertPurpose sslclient The intended use off the X.509 client certificate. 1.1.2.) "X509 store". Server use "X509 store" to verify and validate client keys. 1.1.2.1.) CACertificateFile /etc/ssh/ca/ca-bundle.crt This file contain multiple certificates of certificate signers in PEM format concatenated together. You can get a copy from openssl, apache, KDE, mutt, etc. packages. Original file might is exported from Netscape certificate database and one download URL is: http://www.modssl.org/contrib/ca-bundle.crt.tar.gz 1.1.2.2.) CACertificatePath /etc/ssh/ca/crt "Hash dir" with certificates of certificate signers. Each certificate should be stored in separate file with name [HASH].[NUMBER], where [HASH] is certificate hash value and [NUMBER] is an integer starting from zero. Hash is result from command like this: $ openssl x509 -in certificate_file_name -noout -hash 1.1.2.3.) CARevocationFile /etc/ssh/ca/ca-bundle.crl This file contain multiple "Certificate Revocation List" (CRL) of certificate signers in PEM format concatenated together. 1.1.2.4.) CARevocationPath /etc/ssh/ca/crl "Hash dir" with "Certificate Revocation List" (CRL) of certificate signers. Each CRL should be stored in separate file with name [HASH].r[NUMBER], where [HASH] is CRL hash value and [NUMBER] is an integer starting from zero. Hash is result from command like this: $ openssl crl -in crl_file_name -noout -hash 1.1.2.5.) CAldapVersion LDAP protocol version. Default depend from LDAP library. 1.1.2.6.) CAldapURL Hostport and dn of LDAP URL. No default value. 1.1.3.) HostKey files... Host key for protocol version 2 can contain private key plus X.509 certificate in PEM format. 1.1.4.) X509KeyAlgorithm This is new option that replace old one X509rsaSigType. The option list multiple "X509 Key Algorithms Formats" supported by server. The format is described in sshd_config(5). The default for certificates with RSA key is: X509KeyAlgorithm x509v3-sign-rsa,rsa-md5 X509KeyAlgorithm x509v3-sign-rsa,rsa-sha1 The default for certificates with DSA key is: X509KeyAlgorithm x509v3-sign-dss,dss-asn1 X509KeyAlgorithm x509v3-sign-dss,dss-raw The first listed format for each key-type, i.e. RSA or DSA is used as default in signing. The server will accept all listed formats. 1.1.5.) X509rsaSigType=md5 Deprecated option replaced by X509KeyAlgorithm. 1.1.6.) VAType none Specifies whether `Online Certificate Status Protocol' (OCSP) is used to validate client X.509 certificates. Specified value is used only when OpenSSH is build with OCSP support. See sshd_config(5) man page for allowed values and other VA* options. 1.1.7.) KeyAllowSelfIssued no Specifies whether self-issued(self-signed) X.509 certificate can be allowed only by entry in AutorizedKeysFile that contain matching public key or certificate blob. 1.2.) user files on the server Append in USER_HOME/.ssh/authorized_keys a record with following format: {|CertBlob} where: KEY_TYPE:=x509v3-sign-rsa|x509v3-sign-dss (case sensitive !) WORDDN:={Distinguished Name| Distinguished-Name| Distinguished_Name| DistinguishedName| DN| Subject} WORDDNSUFF:='='|':'|'' NOTES: - WORDDN is case insensitive ! - is like output from command: $ openssl x509 -noout -subject -in A_CERTIFICATE_FILE - can be in RFC2253 format like output from command: $ openssl x509 -noout -subject -in A_CERTIFICATE_FILE -nameopt RFC2253 - Order of items in is not important and separator can be symbol "/", "," or mixed. All following subjects are equal: a)CN=dsa test certificate,OU=OpenSSH Testers,O=Test Team,ST=World,C=XX b)/C=XX/ST=World/O=Test Team/OU=OpenSSH Testers/CN=dsa test certificate c)/O=Test Team/OU=OpenSSH Testers/C=XX/ST=World/CN=dsa test certificate d)O=Test Team,OU=OpenSSH Testers/C=XX,ST=World/CN=dsa test certificate - CertBlob is uuencoded sequence of bytes in only one line. Shell sample: - "Distinguished Name" format: $ ( printf 'x509v3-sign-rsa '; openssl x509 -noout -subject \ -in A_OPENSSH_IDENTITY_FILE \ ) >> $HOME/.ssh/authorized_keys - "blob" format: $ cat A_OPENSSH_IDENTITY_FILE.pub \ >> $HOME/.ssh/authorized_keys NOTES: - adjust user authorized_keys file ownership - user must have at least read access. - SecSH X.509 key type is "x509v3-sign-rsa" or "x509v3-sign-dss". - When OpenSSH is build with "--disable-x509store" YOU CANNOT USE "Distinguished Name" format. You shold use ONLY "blob" format. 2.) client settings: 2.1.) IdentityFile Depends from client. To use X.509 certificate "OpenSSH id-file" must contain both sections - private key and certificate in PEM format: Note: Don't forget to update public key file with command: $ ssh-keygen -y -f IDENTITY_FILE > IDENTITY_FILE.pub Command ssh-add use public key file! 2.2.) global ssh_config, $HOME/.ssh/config or command line 2.2.1.) AllowedCertPurpose sslserver The intended use of the X.509 server certificate. 2.2.2.) "X509 store". Client use "X509 store" to verify and validate server hostkey. See p. 1.1.2.) and check the options: - [User]CACertificatePath; - [User]CACertificateFile; - [User]CARevocationFile; - [User]CARevocationPath; - [User]CAldapVersion; - [User]CAldapURL. Note: When we use own CA we must import CA certificate[s] to "X509 store". More info on: http://roumenpetrov.info/domino_CA/#dca2bundle 2.2.3.) X509KeyAlgorithm The meaning of options is same as in server. See p. 1.1.4.) 2.2.4.) X509rsaSigType=md5 Deprecated option replaced by X509KeyAlgorithm. 2.2.5.) VAType none Specifies whether `Online Certificate Status Protocol' (OCSP) is used to validate server X.509 certificates. Specified value is used only when OpenSSH is build with OCSP support. See ssh_config(5) man page for allowed values and other VA* options. 3.) test X.509 certificates. 3.1.) In openssh build dir run "make check" or "make test". Both commands are equivalent and run regression tests. If you want to test only X.509 certificates you can run $ make check-certs If certificate test scripts fail might you should setup test configuration in the file OPENSSH_SOURCE_PATH/tests/CA/config or use some environment variables. Used variables are described later in the document. Output from "make check-certs" is in color and when is redirected to file later we can see content best with command "less -r ...". When script run a test command print star '*' followed by simple information about command. When command succeed script print at right "done" in GREEN(!) otherwise "failed" in RED(!). After failed command script show on next lines in RED(!) response, skip execution of next command/script, print message like this: .... Testing OpenSSH client with certificates finished. status: failed .... Note that failed is in RED(!) and exit code is NONZERO(!). Some command in a test script must fail. Part of "simple information" about command expected to fail is in RED(!). When command fail script print "done" (THIS IS CORRECT - COMMAND MUST FAIL) and on next lines print in GREEN(!) response. Usually this occur when server reject logon. WHEN ALL TESTS SUCCEED output is: .... Testing OpenSSH client with certificates finished. status: done .... Note that "done" is in GREEN(!) and exit code is ZERO(!). 3.1.1.) Description of variables in Makefile file: - SHELL Used shell to run tests. Supported shell are bash, ksh, zsh and ash. Script might run without porblems on standard unix sh. Example: $ make check-certs SHELL=/bin/zsh 3.1.2.) Description of variables in config file: 3.1.2.1.) main variables: - SUDO (only in config) on some system sshd must be started as root. If necessary set variable to sudo and configure sudo'ers. - TMPDIR (environment or config) directory for temporary files. If not set its value is selected from /tmp, /var/tmp or /usr/tmp. - SSH_X509TESTS (environment or config) list with test scripts. A test script is in file with following name: test-.sh.inc. 3.1.2.2.) openssl: - OPENSSL (environment or config) path to openssl binary. The default is result from command: `which openssl`. - RSA_DIGEST_LIST (environment or config) list with RSA digests in support of openssl. The default value is build at run time from following digest list "md5 sha1 md2 md4 rmd160" and contain only supported from openssl. 3.1.2.3.) server section: Read sshd_config.5 manual page for valid values. - SSHD_PORT (environment or config) Specifies the port number that server listens on and client connect to on SSHD_LISTENADDRESS. The default is 20022. - SSHD_LISTENADDRESS (only in config) Same as sshd option "ListenAddress" but without(!) port number. The default is "127.0.0.1". - SSHSERVER_USEPRIVILEGESEPARATION="yes": (only in config) sshd "UsePrivilegeSeparation" option. if necessary set to "no", to disable privilege separation. - SSHSERVER_SYSLOGFACILITY=AUTH (only in config) sshd "SyslogFacility" option. - SSHSERVER_LOGLEVEL=INFO (only in config) sshd 'LogLevel' option. 3.1.2.4.) certificates: - Variables related to test certificates and CA. (only in config) 3.1.2.5.) OCSP responder: Used only when OpenSSH is build with OCSP support! Variables related to OCSP tests. - SSH_VA_BASEPORT (environment or config) Test script run one or more OCSP responders at same once. First responder listen on specified port, second on port plus one and etc. The default is 20080. - SSH_OPENSLL_OCSP_TMOUT=60 (config) Wait specified number of seconds sockets opened by OCSP responders to close. After this test script continue with next step. This is work around for missing SO_REUSEADDR socket option in OpenSSL OCSP responder. 3.1.2.5.) LDAP: In use only when OpenSSH is build with LDAP support! - SSH_LDAP_DB (config) Specifies LDAP database type. The default is ldbm. - SSH_LDAP_DC (config) Specifies domain name component in LDAP distinguished name. The default is "dc=example,dc=com". - LDAPD_PORT (environment or config) LDAP daemon run by test script run listens on SSHD_LISTENADDRESS and this port. The default is 20389. 3.1.3.) Sample commands to run tests: $ OPENSSL=/usr/local/ssl/bin/openssl make check-certs $ SSHD_PORT=1122 SSH_X509TESTS="agent blob_auth" make check-certs $ RSA_DIGEST_LIST="md5 sha1" make check-certs $ make check-certs SHELL=/bin/ksh When check fail see "Troubleshooting" later in document. 3.2.) Current test scripts uses only rsa as server hostkey. To test sshd with X.509 certificate please find in file openssh_tests.sh variable TEST_SSHD_HOSTKEY and change it. Sample: TEST_SSH_HOSTKEY="${CWD}/testhostkey_rsa-rsa_md5" 3.3.) Test SecSH from "Microsoft Windows OS-es". This is not part of document. Tips: use created after "make check-certs" files: - convert OPENSSH_BUILD_PATH/tests/CA/ca-test/crt/*crt.pem CA certificates from PEM to DER format and import in "Windows keystore"; - import OPENSSH_BUILD_PATH/tests/CA/testid_*.p12 files in "Windows keystore"; - setup your client to use certificate[s](see SecSH client manuals). DON'T FORGET TO REMOVE entries from "Windows keystore" after test! 3.4.) Go to OPENSSH_BUILD_PATH/tests/CA and run command "make clean" to remove all client/server and CA files. 3.5.) files in OPENSSH_SOURCE_PATH/tests/CA directory: config: Configuration file. env.in: Template file. Currently contain variables related to LDAP directories. shell.rc: Shell settings. 1-cre_cadb.sh: Create "Test CA" directories and files. 2-cre_cakeys.sh: Create "Test CA" private keys and certificates. 3-cre_certs.sh: Create client/server certificates. This command create files with mask "PATH_TO_KEYFILEn-[.]" , where is in format "rsa_" or "dsa". DIGEST are form variable "RSA_DIGEST_LIST" specified in "config" file. Files without extention are openssh identity or hostkey files. File with .pub extention contain openssh public key (BLOB format). File with .crt extention contain openssl "text output" for identity files. Files with .p12 extention are for "Microsoft Windows keystore". Note: .p12 = .pfx for Windows. 4-cre_crls.sh: Revoke part of client certificates. 5-cre_ldap.sh Create LDAP ldif files and slapd config. verify.sh: To check certificates against "Test CA". Note: check only testid_*.crt and testhostkey_*.crt files in current directory. functions: Common usefull functions. openssh_tests.sh: Main test script - call other testscripts. test-blob_auth.sh.inc, test-dn_auth_file.sh.inc, test-dn_auth_path.sh.inc, test-agent.sh.inc, test-crl.sh.inc, test-self.sh.inc, test-alg.sh.inc, test-ocsp.sh.inc, test-by_ldap.sh.inc: Test shell scripts. See DESCRIPTION in each file. Note that hostbased authentication we cannot test without to install. Generated testhostkey_* certificates are with sslserver and sslclient purposes and you can use them to test manually hostbased authentication. 4.) Troubleshooting "make check-certs" fails on: 4.1.) "generating a new ... private key for the TEST CA ..." Usually this happen on system without /dev/{u}random. In file [BUILDDIR]/tests/CA/openssh_ca-2.log we can see a message: "... PRNG not seeded ...". Read again WARNING.RNG from OpenSSH sourcedir and/or http://www.openssl.org/support/faq.html 4.1.1.) reconfigure your system and/or openssl 4.1.2.) or do next 4.1.2.1.) install OpenSSH :-( otherwise later "make check-certs" (ssh-keygen) fail with message: "couldn't exec '.../libexec/ssh-rand-helper': ..." and second ./ssh-rand-helper fail with message: "couldn't read entropy commands file ../ssh_prng_cmds: ..." Tip: configure OpenSSH with prefix for example $HOME/test 4.1.2.2.) run: ssh-rand-helper rm -f $HOME/.rnd ln -s .ssh/prng_seed $HOME/.rnd 4.1.2.3.) test openssl with command: /usr/local/ssl/bin/openssl genrsa -des3 -passout pass:change_it Tip: before to create every key with OpenSSL run ssh-rand-helper ! 4.1.2.4.) run again "... make check-certs ..." 4.2.) fail on first check: "* rsa_md5 valid blob failed" - Usually SUDO command is not set. See p. 3.1.2.1. - When you build with tcpwrappers your hosts.allow must permit connections from localhost, otherwise you can see in failed message text like this: "... connection closed by remote host ..." 4.3.) fail on "starting OCSP responder(XXX) on YYY:NNNNN failed" - Ensure sequence of about six free ports and use SSH_VA_BASEPORT to specify first of them. - Ensure enough timeout previous running OCSP responders to free ports. Increase value of SSH_OPENSLL_OCSP_TMOUT in test config file. 5.) FAQ Q.) How to convert a certificate from DER to PEM format? A.) Run command "openssl x509 ..." with command line options -inform/-outform - you can select one of formats: DER, NET or PEM. The default is PEM. Q.) How to convert pfx to p12 file? A.) Just change file extension ;-). Q.) How to use my p12 file in OpenSSH as identity? A.) Run commands: $ openssl pkcs12 -in FILE.p12 -clcerts > id_x509 $ ssh-keygen -f id_x509 -y > id_x509.pub Don't forget to set properly permition on file id_x509, as example "chmod 600 id_x509". Note name of identity file can be one of defaults: 'id_rsa' or 'id_dsa'. Configure client. Q.) How to use p12 file in OpenSSH as hostkey? A.) Note that host keys are password less! It is similar to client identity. Remember umask settings. Run as root commands: # umask 0077 # openssl pkcs12 -in FILE.p12 -clcerts > ssh_host_x509 Note: you must enter export password! # ssh-keygen -p -f ssh_host_x509 -N '' Now hostkey file is password less ! # ssh-keygen -f ssh_host_x509 -y > ssh_host_x509.pub Restore umask settings. Note name of hostkey file can be one of defaults: 'ssh_host_dsa_key' or 'ssh_host_rsa_key'. Configure server, test configuration with command # sshd -t ..../sshd_config and start/restart the server. Don't forget to inform users that hostkey is changed! Q.) How to import CA certificates and/or CRLs in LDAP? A.) You should create a ldif file with LDAP entries that contains binary atributes "cACertificate" and/or "certificateRevocationList" and to specify path to file with certificate or CRL in DER format. Entry should contain objectClass "pkiCA". See definition in core LDAP schema. After this to use command ldapadd or ldapmodify to add/modify LDAP data. See command manual pages. As example when you build OpenSSH with ldap queries after regression test see content of file $(top_builddir)/tests/CA/ldap/ca.ldif . This file is created by the script $(srcdir)/tests/CA/5-cre_ldap.sh and entries are added to LDAP with command: # ldapadd -x -w secret -D cn=... -H ldap://... \ -f .../ca.ldif . See ldapadd manual page for options meaning. Enjoy ;-)